HyTech PLA-F (PLA/ABS Blend)
HyTech PLA-F (PLA/ABS Blend)
HyTech PLA-F (PLA/ABS Blend)
HyTech PLA-F (PLA/ABS Blend)
HyTech PLA-F (PLA/ABS Blend)
HyTech PLA-F (PLA/ABS Blend)
HyTech PLA-F (PLA/ABS Blend)
HyTech PLA-F (PLA/ABS Blend)
HyTech PLA-F (PLA/ABS Blend)
HyTech PLA-F (PLA/ABS Blend)
  • Load image into Gallery viewer, HyTech PLA-F (PLA/ABS Blend)
  • Load image into Gallery viewer, HyTech PLA-F (PLA/ABS Blend)
  • Load image into Gallery viewer, HyTech PLA-F (PLA/ABS Blend)
  • Load image into Gallery viewer, HyTech PLA-F (PLA/ABS Blend)
  • Load image into Gallery viewer, HyTech PLA-F (PLA/ABS Blend)
  • Load image into Gallery viewer, HyTech PLA-F (PLA/ABS Blend)
  • Load image into Gallery viewer, HyTech PLA-F (PLA/ABS Blend)
  • Load image into Gallery viewer, HyTech PLA-F (PLA/ABS Blend)
  • Load image into Gallery viewer, HyTech PLA-F (PLA/ABS Blend)
  • Load image into Gallery viewer, HyTech PLA-F (PLA/ABS Blend)

HyTech PLA-F (PLA/ABS Blend)

Vendor
HyTech
Regular price
$23.00 CAD
Sale price
$23.00 CAD
Regular price
Sold out
Unit price
per 
Shipping calculated at checkout.

- NO ENCLOSURE REQUIRED
- Diameter: 1.75 mm ± 0.03 mm
- Print Temperature: 230 - 240°C (see experience from Sandoz below)
- Hot Bed Temperature: 60-80°C
- Fan: Yes - Same setting as your PLA profiles
- Filamnet Weight: 1 kg
- Empty Spool Weight: 208g

HyTech PLA-F is a fantastic hybrid blend of PLA and ABS and it's got the best of both worlds.  This filament is great for everyday printing and functional parts that require strength.  It comes in 10 colors and they are all very easy to print.

The spool comes with neat winding.  The filament is not brittle at all.  It has great bed adhesion, great layer adhesion, low warp if you use a heated bed.  The parts you print are strong with a slight flex that prevents them from breaking under load.  Heat resistance is higher than PLA.

**There is some ABS smell but it is on the mild side and is strongest when you open the vacuum sealed bag.  Barely noticeable when printing.

**Personal Experience from Sandoz: I have used this product quite a lot and have found it exceptionally easy to print with.  I usually use my regular PLA profile and adjust the temperatures to somewhere around 230°C to 240°C.  Just for fun i have tried printing with this from 205°C all the way up to 245°C and have seen almost no change in quality.  Layer lines seem to disappear at higher temperatures.  I have had my wife and son both enter the room without telling them what was printing to see if they could notice the odor and neither of them could.

***The white filament makes great lithophanes.  Layer lines disappear completely and leave a very good quality image with good contrast.